Empire Boulevard SL Linear Vent-Free Fireplaces 30"

Boulevard Slim Line Linear Vent-Free Fireplaces 30"

This unique clean-burning fireplace features an elegant linear burner mounted between a matte-finished black full panel at the rear and a short tempered-glass deflector panel at the front.  Aided by multiple reflections through the glass in front, the Boulevard SL creates high-definition contrast between the flames and the black panel.  With its clean lines and muted black finish, the Boulevard SL represents the last word in contemporary styling.

Recessed Installation
At just 5 1/2 inches deep the Boulevard SL is the first vent-free fireplace that can install fully in a 2 x 6 stud-framed wall. Add tile right up to the rectangular opening to create a stunningly beautiful, amazingly efficient clean-face fireplace.  The optional trim kit finishes the opening and adjusts for different depths of tile or stone. Recessed installation requires installing the included non-combustible material above and to the sides of the fireplace, and tile or stone to the fireplace opening. The optional trim kit hides tile edges and adjusts from 1/2 to 1 inch.

Partially Recessed Installation
In a 2 x 4 framed wall, the Boulevard SL can install, partially in the wall and finish with one of two fronts. Partially recessed installation requires installing included non-combustible material above the fireplace, and a Mitered Decorative Front.

Surface-Mount Installation
With the available fireplace wrap, the Boulevard SL can be hung like framed art on any wall – including brick, stone, or conventional drywall – and finished with a decorative front. Surface-Mount installation requires a Mitered Decorative Front and a Fireplace Wrap.

Fireplace Dimensions

Features

• Includes Non-Combustible Board (for Full or Partially Recessed Installation)
• Includes Electronic Valve with On/Off Wall Switch and 10-Ft Extension Wire
• Battery Backup with 10-Ft Extension Wire Included
• Fine Mesh Barrier Screen
• Partially Recessed Framing Dimensions: 30 3/4" W x 18" H x 3 1/2" D
• Fully Recessed Framing Dimensions: 30 3/4" W x 29 1/2" H x 5 1/2" D
• 14,000 BTUs
• Weight: 50 lbs
• Type of Gas: LP or Natural
• Ignition Systems: Intermittent Pilot
• Control Options

This Unit Includes:

✓ Non-combustible Board (for full or partially recessed installation)
✓ On-Off Wall Switch with 10-ft Extension Wire
✓ Battery Backup with 10-ft Extension Wire
✓ Fine Mesh Barrier Screen

This Unit Installs:

• Surface-mounted on any wall. Order a decorative front and wrap accessory (Does not require non-combustible materials).

• Partially recessed in a 2 x 4 framed wall - Use the included non-combustible board (finished with tile or stone) and order a decorative front accessory

• Fully recessed in a 2 x 6 framed wall - Use the included non-combustible board and apply tile or stone over the face

This Unit Requires:

• Decorative Front for Surface Mount or Partially Recessed installation
• Non-combustible material (tile/stone) for Partially Recessed and Fully Recessed installation
• Electrical box for Wall Switch
• Electrical box and cover for Battery Back-Up

Decorative Accessories

• Surface-Mount Installation (will require a Cabinet Wrap and Decorative Front)
• Black Cabinet Wrap (DCSL30BL)
• Black Miltered Front (DFSL30MBL)

• Partially Recessed Installation ((Wall must be 2 x 4 framing or deeper)
• Black Miltered Front (DFSL30MBL)

• Fully Recessed Installation (Requires Tile or other non-combustible material to fireplace opening (Wall must be 2 x 6 framing or deeper))
• Black Narrow Trim (DFSL30PBL)
• Narrow Trim is not required for the fully recessed installation, but helps dress out the fireplace opening. Adjusts from 1/2 to 1 inch depth

Control Options

• Battery Operated On/Off Remote Control (FRBC)
• Battery Operated Thermostat Remote Control (FRBTC2)
• Battery Operated Programmable Thermostat Touchscreen Remote Control (FRBTPS)
• Wall Thermostat, Reed Switch (TMV)
• Wall Thermostat, Wireless (TRW)