Outer Marine-Grade Aluminum Outdoor Umbrella

Our marine-grade aluminum umbrellas have been tested successfully in extreme weather and winds up to 38 MPH. However, we strongly recommend that you always close the umbrella when not in use, or when sustained winds exceed 25 MPH.

Outer umbrellas require clearance from the ground to close so please measure your table's height accordingly. The Round Umbrella will close over tables up to 33" tall; the Square Umbrella will close over tables up to 19" tall. Please note only the Round Umbrella will work with Outer's Teak & Aluminum fixed-length dining table.

It is advisable TO CLOSE all umbrellas when they are not in use, and to close and secure your umbrella during adverse weather conditions.

We recommend that the belt be used whenever the canopy is in the closed position. This will prevent a strong wind from opening the umbrella and potentially causing damage.

Outer recommends pairing the Marine Grade Aluminum Umbrella with Outer's Heavy-Duty Galvanized Steel Base. Any base must accommodate a 1.9" diameter pole; specific base weight and size vary based on the umbrella’s dimensions, exposure level, and prevailing wind conditions.

While the cam-cleat is strong enough to hold the umbrella open on its own, we recommend using it with a mast-pin for utmost safety when the umbrella is in the open position. The mast-pin, however, can be used on its own should you choose.

The best way to clean an umbrella is simply using soap, water and a soft cloth or a soft-bristled brush. The umbrella may have to be removed from the base and partially opened to access the top area of the canopy during washing.

No. Always allow the canopy to dry before closing, or there grows a risk for mold and mildew to form, which can stain the canopy over time.

The difference between Outer’s marine grade aluminum coating and normal grade is primarily the thickness of the oxide film penetration. Outer’s Marine Grade Umbrellas are equipped with thicker oxide film penetration and are backed by a 5 year warranty.

* Open Box products are not covered by warranty.

Once the Outer umbrella is secured to the base, locate the cord under the closed canopy and pull firmly away from the mast. Continue pulling the cord lightly, while being cautious of the now opening canopy until it is fully deployed. Once fully open, simply guide the cord into the cam-cleats, which will hold the umbrella open. Finally, insert the provided mast-pin into the hole located in the mast just below the hub.