Concrete Fire Pit Table

The OuterStone® and Concrete Fire Pit Table should only be used for cooking with Outer cooking accessories such as our griddle pan and stands. To order the cooking accessories, reach out to a Product Specialist.

Absolutely. The Concrete and OuterStone® Fire Pit Table has an adjustable foot on each corner to ensure it can be leveled on uneven surfaces.

An aftermarket longer gas hose may be purchased separately to allow for more distance between the propane tank and the base of the unit.

The Outer Fire Pit Table is available in two configurations, one for liquid propane gas (LPG), and one for natural gas (NG). The NG configuration is compatible with a direct NG line hookup

OuterStone® is made from Sintered Stone, a man-made material composed of natural stone. It's unique because its surface cannot be etched, scratched, or burned.

For general cleaning, wipe the OuterStone® with a damp cloth to remove any dust and debris.

For a deeper clean, or to remove stains, wipe the surface with a soft sponge or lint-free rag, mild detergent, and warm water. Rinse thoroughly with water to remove any detergent residue. Make sure the sintered stone has dried completely before using or covering.

The liquid propane gas Outer Fire Pit Table is configured only for use with a 20 lb. LPG cylinder. The propane tank is not included, but they are readily available from local hardware stores.

The natural gas Outer Fire Pit Table is not compatible with any type of propane gas. 

If you are experiencing delayed ignition, the problem is most likely the result of one of the following issues- low gas pressure, clogged burner ports, or ignition failure. You may reference this instructional video that will guide you on how to resolve these potential issues in 3 easy step

The Fire Pit Table should be installed by a qualified service professional and must be installed outside, on a flat, stable surface away from any combustible materials, and at least 4 feet (48 in.) away from any building structure or plants.

The unit should not be installed on dirt or grass. A concrete or slate patio surface is ideal, but the unit may be installed on a wooden deck.

Be sure to install the Fire Pit Table outside in a fully vented area with no overhang or trees within 6 feet (72 in.) above the unit. The Fire Pit Table creates a controlled open-flame, so use common sense when positioning. The Fire Pit Table needs to “breathe” during operation and pulls air in through vents located along the bottom edge. Avoid placing anything up against the sides of the unit that could block air to these vents.

Propane gas can produce small amounts of carbon (soot) when burned. This soot can accumulate on the surfaces of the ceramic spheres over time and occasionally flake off, which is normal. Soot can easily be removed by rinsing with water.

The Outer Fire Pit Table is intended for outdoor enjoyment only. Do not use indoors.

Outer recommends using the ceramic spheres that come with the OuterStone® Fire Pit Table to help stabilize the flame from wind, and radiate and distribute the heat generated from the flame outwards.

However, the burner pan of the Concrete an OuterStone® Fire Pit Table is designed to use any of a variety of aftermarket media, including lava stones, lava granules, fire glass, and ceramic spheres.

The Fire Pit Table is composed of relatively lightweight Glass Fiber Reinforced Concrete (GFRC) with a metal frame.

The Rectangular table weighs approximately 165 lbs, and the Round table weighs approximately 126 lbs. At least two people are needed to move the product.