Round Grove DIY Brick Pizza Oven

Build your oven is days rather than weeks!

Once this masonry brick oven is delivered, you'll be able to finish it with the style that matches your culinary creativeness.  Since the pizza oven is masterfully built to perfect specs for cooking, you won't need to spend months attempting to build a DIY Wood Fire Pizza Oven that may not work as expected.

Brick Oven Specs

• The oven is constructed of 18 gage galvanized u-channel frame (3551A-G70 and 3551A-G10) with top and bottom plates.
• The steel is connected with Philips #2 Zinc Plated Wafer Head Self Drilling Screw.
• Steel studs are spaced between 12”and 16” on center throughout each wall frame.
• The grout between the joints is refractory mix #50 Gray, FXC240, High-strength, polymer and proprietary additive enhanced, lightweight dry cement mix.
• Brick Oven is insulated with Roxul ComfortBatt mineral wool insulation.

IMPORTANT:  On the day of delivery you will be required to provide a forklift or Bobcat to off load your unit from the truck.

The smoke chamber exhausts through a Double flue liner up to 14” diameter depending on the overall height, or alternatively through a double-wall flue liner with reduced clearance to combustibles. A clay flue liner is an option and can top the chimney and a flue liner terminates inside the clay flue liner. The clay flue liner or double wall pipe is topped by a spark arrester/chimney cap.

The exterior of the oven is covered with a ¼” magnesium oxide board and wrapped with fiberglass reinforcement, then scratch-coated with ¼” to 3/8” mix of 2 parts Type M mortar and 3 parts mason sand. Municipal codes may vary. Round Grove Products recommends the chimney terminates at least 24” higher than any structure within a 10’ radius.

IMPORTANT: Please note this is JUST a PIZZA OVEN with WOOD STORAGE under it. This is NOT a COMBO UNIT. These units arrive with JUST a scratch-coat on the exterior and must be finished to your liking upon installing.

Hipped Spec Guide

Squared Spec Guide